May or may not be applicable to your case, but often applications need additional configuration to work with a reverse proxy. Usually setting from what IPs it will accept forward headers from (your reverse proxy) and what the original requested host was (externally requested domain, eg: yourservice.yourdomain.com)

If your new setup has resulted in changes to either of those things, the issue might be a now-incorrect config of your apps behind the reverse proxy.

I strongly recommend not disclosing that you intend to use the monthly savings on vodka and gummies

Same. People literally can not comprehend that I accept whole heartedly that I believe many of the things that I do and continue to do to be immoral.

Yeah, maybe I love meat too much and I’m too weak. That has absolutely nothing to do with how I establish my moral compass.

I’d like to be a truely good person, but I’ll be goddamned if the way I do that is lowering the bar to where I already stand.

Oh nice, I’ll give that a shot. I was using IOTlink but the service wasn’t reliable on my machine and needed to be restarted constantly…

I’ll give HASS.agent a shot! Thanks

If you get a reliable way to sleep a windows machine via MQTT (not sure if that’s a route you’d take) but I’d be super interested in hearing about it.

I had a similar revelation. Home assistant has a WOL component, so you can set that up for easy starts. I’ve had mixed success with mechanisms to get HA to sleep the computer, though.

Ideally I want the machine to be sleeping I’d I’m not using it.

I’d never looked at them before, but yeah that super flower super modular supply looks pretty sweet. It looks like it has a ton of ports that I assume can be wired up as whatever you need.

For me, the splitters were just generic: they plug to an existing molex out connector and give you 5 SATAs on a ribbon.

https://a.co/d/gXtQ3Qp is what I’d bought, just for reference. The power supply I used them with wasn’t modular (ancient) and so whatever it had was what there was.

Maybe I misread, but if you are planning on having two different PSUs in play for the same system, it’s my understanding that it’s important to make sure the DC outputs share a common ground, which might be a little extra wiring.

Depending on how power hungry the drives are, and if your PSU has enough spare power, you can get cable splitters. I had some spare molex ports which I plugged a cable from Amazon that split it into 5 SATA power connectors.

You don’t want to infinitely split cables though, as tempting as that can be, because there are real electrical limits to doing that. Also just because a power supply is rated at X watts, that’s the total. Hard drives will use the 5V and 12V rails and usually there are individual limits on each rail.

Upgrading the PSU is another option. Probably the cleanest easiest best solution IMO. But even then, you probably can’t find a PSU that’ll give you 12 SATA connectors out of the box so you’ll probably need some splitters in there anyways.

In my case specifically, I’ve actually got a second power supply (because i already had it and it was otherwise just gathering dust) powering the extra drives. It’s a bit more complicated to get set up but, it’s an option as well.

Edit: also if you’re asking yourself where can you physically PUT the drives, I 3D printed these and slapped some fans on them:

https://www.thingiverse.com/thing:4875498

I interpreted the sentiment from OP that it was just reframing the reality in either case: the server is going to run, and it’s going to generate heat.

You can either frame that reality as “waste heat is being generated” or “my furnace doesn’t have to work as hard”

As others have said, running out of motherboard SATA slots doesn’t mean you need a new machine to support expansion.

You can get m2 adapter slots for more SATA drives.

If you think you’ll be building a NAS in the future, and are cheap like I am, you might consider getting a pci-e expansion card for SAS rather than SATA drives. They’re backwards compatibile with SATA drives, but open you up to being able to use SAS drives which are common in enterprise data centers. You can get used lots of those drives on eBay WAY cheaper per TB when the data centers hour them out.

I’ve got a machine with 16 SAS drives running the unRaid OS, and I’m very happy with it for data hoarding and media serving. The drives (with shipping) cost $5/TB.

What dinosaur

Power costs is a poor tax in the same way skipping the dentist and getting a root canal later is.

Also in the process of power efficiency-izing my lab. It just wasn’t a feasible option before, I didn’t have the means. I just paid interest via electricity.

Whisper is fantastic and has different sized models so you can zero in to what gives you the best mix of speed/accuracy for whatever hardware you’ll be running it on

Lol old Lemmy users chizzed

I actually generally hear this phrase IRL from teenagers making minimum wage while trying to get some boomer to stop badgering them to accept an expired coupon.

It’s just how limits work.

The issue isn’t with the software.

Imagine if I had photo radar sending tickets for people who were “almost” speeding.

The software config isn’t about “the markets” or “corporations”.

The founder of the modern Olympics vision was that it be a celebration of art as well.

The society that separates its scholors from its warriors will have its thinking done by cowards and its fighting by fools.

The idea of some kind of “purity” in physical competition is robbing ourselves of the completeness of the human experience IMO.