Sinkin’ Park

Code crackers when Alan Turing showed up

Typo in your network_mode of the qbit container?

I have the T6 as my main but I cannot do per-room heating because my Sonoff TRV’s cannot talk to it in HA. I got the T6 before working with HA though. In my country the T6 is WiFi and you need the Resideo app.

Do your headphones have a 3.5mm jack? If so, you could use a bt receiver on that, make sure the receiver has multipoint.

A more difficult, but more likely to work properly, option is to get an audio interface with two inputs. Input your deck and phone into it and put a bt transmitter on the output or headphone jack. Keep in mind line-ins are usually in summed mono to you won’t get directional sound.

But just to make sure I covered the obvious: could you not just play the podcast through your Deck while playing? I’m not familiar with SteamOS but Steam BPM has this option.

It’s a well worded opinion and a properly defended stance. Based on what I know I will now make a mental note this happened, go on with my life and keep an eye on what else happens in the next couple of years.

Yeah so I had this as well. Every day or so I’d get locked out, had to do the sms unlock thing which sometimes wouldn’t work.

What I did is I added an alias to the account, made it the primary and removed login priviliges from the ‘old’ one.

For all the things you still use the address, it’ll be fine. It’s just MS based logins that’s you’d have to change.

Could be an issue with the PCIe drivers (i.e. chipset driver). If the drive goes into gone mode, check device management to see if the drive shows up at all. If it does, open disk management to see if the partitions initialise at all.

If your drive is detected, go to device management to see which PCI subsystem it’s connected to by selecting it and then go to View - devices by connection.

If it is detected, you can also check its values with something like CrystalDisk to see if something is wrong.

Lastly, if you have another NVMe drive lying about (long shot, I know), chuck it in the same port as the failing one and reboot a couple of times to see if something breaks.

To sum up: it’s either the drive or the PCI interpretation layer in Windows. Eliminate to find the cause, then fix that. Since it works fine in Linux I think you can rule out hardware issue.

To be clear, I’m the last one to say one shouldn’t invest in money saving innovation. But the breaking even should be number one priority. I, for instance have all kinds of energy savers in my house that have cost me several hundreds. They’ll only be returned in a few years and I need to manage them properly.

Still cheaper than getting a 3D printer and filament and stuff. And CAD/CAM software.

Yeah so that seems pretty dark

Shit bird

I don’t ovulate but some of these resonate

Don’t knock it till you try it

I’ve been in therapy for a while now but this is actually great advice

Thanks for sharing, turned it off on my tv and shared it

I think I need to read up on the fediverse a bit more. Technically it looks like anything in the fediverse at the moment is ActivityPub, even though it supports 3 more protocols. At this point, only Hubzilla uses something other than ActivityPub, even though it also makes use of AP. I was confused because Matrix is also an open protocol and also federated. I had figured everything federated could talk to each other underneath… That’d be the dream, right?

Hmm okay. I’ve logged into Element with my lemmy.world account though

I think Element does what you’re looking for. Get yourself a fediverse account, log in and watch it go. Difficulty, as ever, is getting your contacts to switch.

Well FCUK is French Connection United Kingdom and DKNY is Donna Karen New York so… Kinda?